Makita 18V DHP481RTJ Lithium Ion Brushless Combi Hammer Drill 2x 5.0Ah Batteries, Charger and MacPac Case. The Makita DHP481 LXT combi drill is powered by an 18v lithium-ion battery and the brushless motor enables up to twice the run-time of traditional motors.This two-speed drill will run up to 2,100rpm in high gear and 550rpm in low. It will deliver 31,500 impacts per minute in high gear and 8,250 impacts per minute in low gear. The 13mm single sleeve keyless chuck enables 16mm capacity in masonry, 13mm in steel and a massive 76mm in timber. Torque can be adjusted to 21 alternative settings and has a dedicated drilling mode. The DHP481 will generate 60Nm of fastening torque (soft joint) and between 115-125Nm (hard joint), the highest torque yet from the Makita 18v range. There are twin LED job lights with afterglow once the variable speed trigger is released and a new side handle configuration gives light tool control.
Coupled with the soft grip ergonomic handle design positive drill-driver capability is assured. It weighs just 2.7kg, and is more compact (20mm shorter) than the previous BHP458 model. Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge. Single sleeve keyless chuck allows for easy bit installation/removal by one hand.
Twin LED job light with afterglow. Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity. Variable speed control by trigger. Best possible ergonomic handle for drill-driver applications.
Compact overall length of 205mm. XPT - Extreme Protection Technology. Soft Application Max Torque (Nm): 60. Hard Application Max Torque (Nm): 115-125. Torque Settings: 21 + Drill.LED Job Light: Yes / Twin / After-glow. Battery Compatibility: 18v Lithium-Ion (LXT). Variable Speed Control Trigger: Yes. No Load Speed (RPM) High: 0-2100. No Load Speed (RPM) Med: N/A. No Load Speed (RPM) Low: 0-550. Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal.
Screw Capacity: Machine Screw (mm): 6. Screw Capacity: Wood Screw (mm): 10 x 90. Drill Capacity: Concrete (mm): 16. Drill Capacity: Metal (mm): 13.Drill Capacity: Wood (mm): 76. Impact Rate (BPM) High: 0-31500. Impact Rate (BPM) Med: N/A. Impact Rate (BPM) Low: 0-8250. Kg with 1.5/2Ah Batt: 2.5. Kg with 3/4/5Ah Batt: 2.7. 1x DHP481 Brushless Combi Drill.
2x BL1850 5.0AH Batteries. The item "Makita 18V DHP481RTJ Lithium Ion Brushless Combi Hammer Drill 5.0Ah Batteries" is in sale since Friday, March 6, 2020.
This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Cordless Drills". The seller is "dvspowertools" and is located in Basingstoke.
This item can be shipped to United Kingdom, United States, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Bahrain, Brazil, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.